Curing EPS epoxy board

General surfing discussions, with a focus on Oahu. Instructions on how to register
User avatar
kaku
Posts: 9
Joined: Sat Jan 29, 2005 3:22 pm

Curing EPS epoxy board

Postby kaku » Tue Jul 24, 2007 9:49 pm

** Sorry, I posted the same message here in case some people can't access the Backyard Boardbuilder forum **


I've read the posts a while back about heat curing EPS foam & epoxy glassed boards. Bambam808 gave some good info about the temps and times.

I'm wondering if the board will ever reach full strength without the heat cure? What level of strength would it achieve without the heat method? How long would the board need to cure?

This type of board have been available for some time now. I was curious if the major manufacturers on the mainland go to the trouble of heat curing before delivery to the customer?

Thanks for any info anyone can provide.

bannbann808
Posts: 12
Joined: Wed Jul 04, 2007 1:59 pm

Postby bannbann808 » Tue Jul 24, 2007 11:51 pm

You're welcome! As far as reaching a full cure without heat I think epoxy will at best be 90% of it's full strength potential after two weeks. You could just leave your board in your car though and let the Hawaiian sun take care of the cure.
_________________

BTW Kacko, welcome to the board!
STFU


Return to “Surf Talk - New Member Registration”

Who is online

Users browsing this forum: No registered users and 51 guests